OEX Air Conditioning TX Valve Block Pad 1 Ton TXX09001

The OEX Air Conditioning TX Valve Block Pad is listed as a 1 ton TX valve and carries part number TXX09001. It is an OEX cooling component supplied as each, with a one year warranty and a stated weight of 1kg.

This valve is described as a block style TX valve, with block pad TX style and the following fitting details: inlet fitting #6, outlet fitting #8, suction inlet fitting #10 and suction outlet fitting #10. The note also lists inlet 10.10mm, outlet 15.45mm, suction inlet 18.25mm and suction outlet 18.25mm.

For buyers comparing options, the most useful references here are the OEX brand, TXX09001 part number, 1 ton rating and the block pad TX style. Those details are the safest starting point when checking against the vehicle or machine it is intended for.

Key Features

• OEX air conditioning TX valve
• Block pad TX style
• 1 ton rating
• Part number TXX09001
• Outlet fitting #8
• Inlet fitting #6

Specifications

• Brand: OEX
• Product type: Air Conditioning TX Valve
• TX type: Block
• TX style: Block - Pad
• Part No.: TXX09001
• Tonnage: 1
• Inlet fitting: #6
• Outlet fitting: #8

Fitment references supplied

• Hino 300 Series
• Honda Civic
• Honda CR-V
• Komatsu D155AX-6
• Komatsu D65PX-16
• Komatsu HB205-1
• Komatsu HB215LC-1
• Komatsu PC160-7/LC-7

Application and Buying Notes

Before ordering, confirm that your system calls for a block pad TX valve with the same TXX09001 part number, because that is the cleanest match point for this OEX unit. The listed fittings are specific: inlet #6, outlet #8, suction inlet #10 and suction outlet #10, with the note giving the corresponding millimetre measurements.

The valve is supplied as a single piece and weighs 1kg, which can be useful when checking what is being replaced or comparing packaging between suppliers. The one year warranty is also listed, but warranty cover still depends on correct application and proper installation.

Because fitment varies by application, the safest approach is to use the part number, valve style and fitting sizes together. If the original part is damaged or unreadable, compare the inlet, outlet and suction connection sizes carefully so you do not mistake a similar-looking TX valve for the correct one.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number TXX09001 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type AIR CONDITIONING TX VALVE, Unit of Measure EACH, Warranty One Year, Outlet Fitting #8, Tonnage 1, Note Inlet: (10.10mm) Outlet: (15.45mm) Suction Inlet: (18.25mm) Suction Outlet: (18.25mm), TX Style Block - Pad, Product Group 1 COOLING, Part No. TXX09001, Brand OEX.

Additional published details for cross-checking include Description OEX Air Conditioning TX Valve Block Pad 1 Ton, Inlet Fitting #6, Suction Inlet Fitting #10, TX Type Block, Suction Outlet Fitting #10, Weight 1kg, Product Group 2 AC COMPONENTS.

OEX Air Conditioning TX Valve Block Pad 1 Ton. Part number TXX09001 should be checked first. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number TXX09001, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a air conditioning tx valve in workshop, fleet, trade, agricultural, or construction service, the listed electrical specification should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include HINO 300 SERIES, HINO 300 SERIES 2011, HONDA CIVIC, HONDA CIVIC 2005, HONDA CIVIC 2006, HONDA CIVIC 2007. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

The listed warranty is One Year. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Confirm compatibility by matching part number TXX09001, TX style Block - Pad, 1 ton rating, and the stated fitting sizes and application details before ordering.

FAQ

What is the part number for this OEX TX valve?

The part number listed is TXX09001. For this listing, part number TXX09001 is the main reference point. Published fitment references include HINO 300 SERIES, HINO 300 SERIES 2011, HONDA CIVIC. These details should still be checked against the original unit before ordering.

What type of TX valve is it?

It is listed r conditioning TX valve with TX type Block and TX style Block - Pad. For this listing, part number TXX09001 is the main reference point. Published fitment references include HINO 300 SERIES, HINO 300 SERIES 2011, HONDA CIVIC. These details should still be checked against the original unit before ordering.

What tonnage is specified?

The listed tonnage is 1 ton. For this listing, part number TXX09001 is the main reference point. Published fitment references include HINO 300 SERIES, HINO 300 SERIES 2011, HONDA CIVIC. These details should still be checked against the original unit before ordering.

What fittings are listed for this valve?

The listed fittings are inlet #6, outlet #8, suction inlet #10 and suction outlet #10. For this listing, part number TXX09001 is the main reference point. Published fitment references include HINO 300 SERIES, HINO 300 SERIES 2011, HONDA CIVIC. These details should still be checked against the original unit before ordering.

What size measurements are noted?

The note lists inlet 10.10mm, outlet 15.45mm, suction inlet 18.25mm and suction outlet 18.25mm. For this listing, part number TXX09001 is the main reference point. Published fitment references include HINO 300 SERIES, HINO 300 SERIES 2011, HONDA CIVIC. These details should still be checked against the original unit before ordering.

Which applications are referenced in the supplied fitment data?

Referenced applications include Hino 300 Series, Honda Civic, Honda CR-V, several Komatsu models, Kubota RTV1100, Kubota Series-M, Kubota SVL75-2, Kubota U55-4, Suzuki Liana and Toyota Echo. Fitment still needs to be confirmed against the part number and connection details. For this listing, part number TXX09001 is the main reference point. Published fitment references include HINO 300 SERIES, HINO 300 SERIES 2011, HONDA CIVIC. These details should still be checked against the original unit before ordering.