OEX Starter Motor 12V 9 Tooth CW Delco 10MT Style DXS9109

The OEX starter motor under part number DXS9109 is a 12V unit in 10MT style, with clockwise rotation and 9 teeth on the pinion. It is listed as a new starter motor with a pad mount type and a cast iron mounting bracket, so the mounting arrangement and starter family are important checkpoints before ordering.

Key dimensions include 83mm mount centres, a 71mm flange diameter, 10mm mount hole diameter, 285mm overall length, 25mm pinion diameter and 6mm pinion at rest. The power rating is 2.3kW, which makes the electrical specification just as important as the physical fit when comparing replacements.

This starter is marked as suitable for Delco units and is identified as 10MT style. It suits a dry clutch application and carries a 3 year passenger and 1 year commercial warranty, which gives a clear service-category distinction when planning the purchase for road or fleet use.

Key Features

• 12V starter motor
• Clockwise rotation
• 9-tooth pinion
• 10MT style
• Pad mount type
• Cast iron mounting bracket

Specifications

• Part number: DXS9109
• Brand: OEX
• Power rating: 2.3kW
• Voltage: 12V
• Series: 10MT
• Mount centres A: 83mm
• Flange diameter: 71mm
• Mount hole diameter: 10mm

Verified fitment applications

• CHEVROLET C10
• CHEVROLET C20
• CHEVROLET C30
• CITROEN C5
• HOLDEN H SERIES
• HOLDEN MONARO
• HOLDEN SUBURBAN

Application and Buying Notes

Before ordering, match the starter motor by part number DXS9109, rotation CW, 9-tooth pinion and 10MT style, because those details are the quickest way to avoid a mismatch when replacing an existing starter. The pad mount type, 83mm mount centres and 71mm flange diameter should also be checked against the removed unit, especially where the original part has been changed previously.

The 2.3kW power rating, 12V electrical system and dry clutch application all matter when confirming the correct replacement. If your vehicle or engine combination uses a Delco starter in this 10MT pattern, the listed dimensions and mounting details provide the best comparison points rather than relying on appearance alone.

This unit is 285mm overall and weighs 10.48kg, so physical clearance and handling can be relevant during installation. The 10mm mount hole diameter, 25mm pinion diameter and 6mm pinion at rest are useful checks if you are comparing against an existing starter on the bench or in the vehicle.

Fitment listings include Chevrolet C10, C20 and C30, Citroen C5, and Holden H Series, Monaro and Suburban applications. Even with those listed applications, the safest approach is to confirm the existing starter specification against DXS9109 and the full mounting measurements before placing the order.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number DXS9109 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres A 83mm, Number of Teeth 9, Pinion at Rest 6mm, Power Rating 2.3kW, Series 10MT, Voltage 12, Item Type Starter Motor.

Additional published details for cross-checking include Starter Mount Type Pad, Weight 10.48kg, Product Group 1 ROTATING ELECTRICAL, Part No. DXS9109, Brand OEX, Description OEX Starter Motor 12V 9Th CW Delco 10MT Style, Flange Diameter 71mm, Mount Hole Diameter 10, Overall Length 285mm, Pinion Diameter 25mm.

OEX Starter Motor 12V 9Th CW Delco 10MT Style. Part number DXS9109 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number DXS9109, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include CHEVROLET C10, CHEVROLET C10 1974, CHEVROLET C10 1975, CHEVROLET C10 1976, CITROEN C5, CITROEN C5 2001. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Please confirm fitment by matching part number DXS9109, 12V specification, 10MT style, CW rotation and the listed mounting measurements against your original starter and vehicle application before purchase.

FAQ

What is the part number for this starter motor?

The part number is DXS9109. For this listing, part number DXS9109 is the main reference point. Listed voltage is 12. Published fitment references include CHEVROLET C10, CHEVROLET C10 1974, CHEVROLET C10 1975. These details should still be checked against the original unit before ordering.

What voltage is this starter motor?

It is a 12V starter motor. For this listing, part number DXS9109 is the main reference point. Listed voltage is 12. Published fitment references include CHEVROLET C10, CHEVROLET C10 1974, CHEVROLET C10 1975. These details should still be checked against the original unit before ordering.

What rotation does this starter motor have?

It has clockwise rotation, listed as CW. For this listing, part number DXS9109 is the main reference point. Listed voltage is 12. Published fitment references include CHEVROLET C10, CHEVROLET C10 1974, CHEVROLET C10 1975. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 9 teeth. For this listing, part number DXS9109 is the main reference point. Listed voltage is 12. Published fitment references include CHEVROLET C10, CHEVROLET C10 1974, CHEVROLET C10 1975. These details should still be checked against the original unit before ordering.

Which unit make does it suit?

It is listed as suiting Delco units. For this listing, part number DXS9109 is the main reference point. Listed voltage is 12. Published fitment references include CHEVROLET C10, CHEVROLET C10 1974, CHEVROLET C10 1975. These details should still be checked against the original unit before ordering.

What warranty is listed for this starter motor?

The warranty is 3 years for passenger use and 1 year for commercial use. For this listing, part number DXS9109 is the main reference point. Listed voltage is 12. Published fitment references include CHEVROLET C10, CHEVROLET C10 1974, CHEVROLET C10 1975. These details should still be checked against the original unit before ordering.