OEX Starter Motor 24V 11T CW Nikko Style NXS9701

The OEX Starter Motor NXS9701 is a new 24V starter motor in Nikko style, set up with 11 teeth, clockwise rotation and a 4.5kW power rating. It is listed with a 2 hole starter mount type, 163mm mount centres A, a 95mm flange diameter and an overall length of 295mm, so it is the sort of unit that should be checked against the existing starter before purchase.

This starter motor is supplied as a new unit and is listed for dry clutch use. The pinion is 40mm in diameter, the pinion at rest measurement is 44mm, and the mount hole diameter is 15mm. Those measurements matter when comparing the starter to the original unit, especially where physical space, flange size and mounting pattern need to match closely.

OEX states that its products are sourced from market leading original equipment manufacturers and aftermarket suppliers, with supply from ISO certified factories. The unit is backed by a 3 year passenger and 1 year commercial warranty, which gives useful buying context for a 24V rotating electrical component such as this starter motor.

Key Features

• 24V starter motor
• 11 tooth pinion
• Clockwise rotation
• 4.5kW power rating
• New unit
• 2 hole starter mount type

Specifications

• Brand: OEX
• Type: Starter Motor
• Part No.: NXS9701
• Voltage: 24V
• Rotation: CW
• Number of teeth: 11
• Power rating: 4.5kW
• Starter mount type: 2 hole

Verified fitment references

• HIDROMEK HMK300LC
• HIDROMEK HMK370LC-HD
• HITACHI EX300-5
• HITACHI EX350H-5
• HITACHI EX370HD-5
• HITACHI LX130-7
• HITACHI LX160
• HITACHI ZW220

Application and Buying Notes

Before ordering, match the part number NXS9701 and compare the key physical details against your existing starter: 24V, 11 teeth, clockwise rotation, 2 hole mount, 163mm mount centres A, 95mm flange diameter and 295mm overall length. Those dimensions are the most practical checks for a starter motor because a close visual match is not always enough.

This unit is listed for dry clutch use, and the note supplied with the product says, “For Wet Clutch use DRX72010”. That means the clutch type is an important selection point, not just the voltage or tooth count. If your application is wet clutch, this is not the listed option to use.

The starter is described as Nikko style and suits unit make Nikko. If you are replacing an original starter on equipment with a Nikko-style unit, confirm the pinion size, mounting pattern and rotation direction before fitting. The 4.5kW rating and 24V specification should also be checked against the machine’s electrical system so the replacement aligns with the original application.

Fitment references are broad across several heavy equipment makes and models, including HITACHI, ISUZU, JCB, KAWASAKI, LINK-BELT, SUMITOMO and HIDROMEK. Even so, the safest approach is to verify the starter on the machine by part number and by the measured dimensions, because model names and series listings can cover multiple starter variants.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number NXS9701 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Centres A 163mm, Number of Teeth 11, Pinion at Rest 44mm, Power Rating 4.5kW, Suits Unit Make Nikko, Note For Wet Clutch use DRX72010, New / Reman. New.

Additional published details for cross-checking include Wet / Dry Clutch Dry, Product Group 2 STARTER MOTORS, Part No. NXS9701, Brand OEX, Description OEX Starter Motor 24V 11Th CW Nikko Style, Flange Diameter 95mm, Mount Hole Diameter 15, Overall Length 295mm, Pinion Diameter 40mm.

OEX Starter Motor 24V 11Th CW Nikko Style. Part number NXS9701 should be checked first. Listed voltage is 24. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number NXS9701, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 24 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include HIDROMEK HMK300LC, HIDROMEK HMK300LC 2017, HIDROMEK HMK370LC-HD, HIDROMEK HMK370LC-HD 2016, HITACHI EX200-1/2, HITACHI EX300-2. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm fitment by matching part number NXS9701, the 24V specification, 11 tooth clockwise rotation, 2 hole mount pattern, and the listed dimensions before ordering. If your application is wet clutch, the supplied note directs you to DRX72010 instead.

FAQ

What is the part number for this starter motor?

The part number is NXS9701. For this listing, part number NXS9701 is the main reference point. Listed voltage is 24. Published fitment references include HIDROMEK HMK300LC, HIDROMEK HMK300LC 2017, HIDROMEK HMK370LC-HD. These details should still be checked against the original unit before ordering.

What voltage and rotation does it use?

It is a 24V starter motor with clockwise rotation. For this listing, part number NXS9701 is the main reference point. Listed voltage is 24. Published fitment references include HIDROMEK HMK300LC, HIDROMEK HMK300LC 2017, HIDROMEK HMK370LC-HD. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

The pinion has 11 teeth. For this listing, part number NXS9701 is the main reference point. Listed voltage is 24. Published fitment references include HIDROMEK HMK300LC, HIDROMEK HMK300LC 2017, HIDROMEK HMK370LC-HD. These details should still be checked against the original unit before ordering.

Is this starter motor new or remanufactured?

It is listed as new. For this listing, part number NXS9701 is the main reference point. Listed voltage is 24. Published fitment references include HIDROMEK HMK300LC, HIDROMEK HMK300LC 2017, HIDROMEK HMK370LC-HD. These details should still be checked against the original unit before ordering.

What clutch type is this starter intended for?

It is listed for dry clutch use. The note supplied says, “For Wet Clutch use DRX72010”. For this listing, part number NXS9701 is the main reference point. Listed voltage is 24. Published fitment references include HIDROMEK HMK300LC, HIDROMEK HMK300LC 2017, HIDROMEK HMK370LC-HD. These details should still be checked against the original unit before ordering.

What warranty is listed for this OEX starter motor?

The listed warranty is 3 year passenger and 1 year commercial. For this listing, part number NXS9701 is the main reference point. Listed voltage is 24. Published fitment references include HIDROMEK HMK300LC, HIDROMEK HMK300LC 2017, HIDROMEK HMK370LC-HD. These details should still be checked against the original unit before ordering.