OEX Alternator 12V 90A Valeo Style VXA014

The OEX Alternator VXA014 is a new 12V, 90A unit built in Valeo style for applications that use a pad mount alternator with a 5 groove pulley. It is supplied with an internal regulator, IR189 pin code, 52mm pulley outside diameter, and a 140mm mount centre-to-centre measurement.

This alternator is listed under OEX as part number VXA014 and is identified for Valeo unit make. The adjusting hole diameter is 10.5mm, and the unit weight is 5.12kg, which are useful checks when comparing against the original alternator already fitted to the vehicle.

OEX states its products are sourced from market leading original equipment manufacturers and aftermarket suppliers, with factories that are ISO9001 certified for engineering, testing, and quality control procedures. This alternator is backed by a 3 year passenger / 1 year commercial warranty, which is a useful consideration for workshop and private use alike.

Key Features

• 12V alternator
• 90A power rating
• Valeo style application
• Internal regulator
• 5 groove pulley
• Pad mount alternator

Specifications

• Part No.: VXA014
• Brand: OEX
• Type: Alternator
• Voltage: 12V
• Power Rating: 90A
• Regulator Type: Internal
• Suits Unit Make: Valeo
• Alternator Mount: Pad

Fitment guidance

• Fitment information supplied references Audi 80 models, including 1994 and 1995 applications.
• Fitment information supplied also references Mercedes-Benz A-Class models from 1997 through 2007.
• Fitment information supplied references Mercedes-Benz B-Class in the fitment set, but no sample application years were provided for that line.

Application and Buying Notes

Before ordering, compare the part number VXA014 with the alternator you are replacing, then check the mounting style, pulley setup, and regulator details. The key identifiers here are 12V, 90A, internal regulator, IR189 pin code, 5 groove pulley, 52mm pulley outside diameter, and pad mount configuration.

The 140mm mount centre-to-centre measurement and 10.5mm adjusting hole diameter are practical checks when confirming whether this alternator will line up correctly on the engine bracket. If either the mounting pattern or pulley section differs from your original unit, the alternator may not be a direct match even if the vehicle make appears in the fitment list.

Because the supplied fitment set spans Audi 80 and Mercedes-Benz A-Class applications, it is sensible to verify the exact vehicle details, engine arrangement, and the original alternator markings before buying. A Valeo-style unit can still vary in mounting and electrical details, so part number matching remains the safest check.

The 5.12kg weight is also worth noting when comparing replacement units, particularly if you are matching an existing alternator in a workshop environment. For commercial use, the warranty is listed as 1 year, while passenger use is listed as 3 years, so it is worth checking the intended application before purchase.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number VXA014 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type ALTERNATOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Pin Code IR189, Pulley Outside Diameter 52mm, Regulator Type Internal, Voltage 12, Mount Cnt to Cnt 140mm, Weight 5.12kg, Product Group 1 ROTATING ELECTRICAL.

Additional published details for cross-checking include Part No. VXA014, Brand OEX, Description OEX Alternator 12V 90A Valeo Style, Adjusting Hole Diameter 10.5, Power Rating (Amp) 90, Pulley Section 5 Groove, Suits Unit Make Valeo, Alternator Mount Pad, New / Reman. New.

OEX Alternator 12V 90A Valeo Style. Part number VXA014 should be checked first. Listed voltage is 12. Listed output rating is 90. These details form the core reference points used by parts interpreters when confirming the correct replacement.

Mount style is Pad. Regulator type is Internal. Pulley configuration is 5 Groove. Those physical and electrical details should line up with the original unit before the replacement is approved for fitment.

For part number VXA014, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a alternator in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 and output 90 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include AUDI 80, AUDI 80 1994, AUDI 80 1995, MERCEDES-BENZ A-CLASS, MERCEDES-BENZ A-CLASS 1997, MERCEDES-BENZ A-CLASS 1998. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

The listed warranty is 3yr Passenger 1yr Commercial. Warranty terms should be considered alongside correct application and part identification, as warranty does not replace fitment confirmation.

Compatibility note: Confirm compatibility by matching part number VXA014, the Valeo-style application, and the physical details including 12V, 90A, internal regulator, IR189 pin code, 52mm pulley outside diameter, 5 groove pulley, 140mm mount centre-to-centre, and 10.5mm adjusting hole diameter against the unit being replaced.

FAQ

What is the part number for this alternator?

The part number is VXA014.

What voltage and output does this alternator have?

It is a 12V alternator with a 90A power rating.

What type of regulator does it use?

This alternator uses an internal regulator.

What pulley setup does it have?

It has a 5 groove pulley with a 52mm outside diameter.

What fitment information is supplied?

The supplied fitment information references Audi 80, including 1994 and 1995 applications, and Mercedes-Benz A-Class models from 1997 through 2007. Mercedes-Benz B-Class is also referenced in the fitment set, but no sample years were provided for that line.

What warranty is listed?

The warranty is listed as 3 years for passenger use and 1 year for commercial use.