OEX Starter Motor 12V 15 Tooth CW Mitsubishi Style MXS2018

The OEX MXS2018 is a new 12V starter motor in Mitsubishi style, built with 15 teeth, clockwise rotation and a 1.6kW power rating. It suits Mitsubishi applications and uses a 2 hole starter mount type with a 77mm flange diameter and 10.5mm mount hole diameter.

Key dimensions matter with starter motors, and this unit measures 227mm overall length, 45mm pinion diameter and 28mm pinion at rest. It weighs 4.56kg and is listed as a dry clutch unit, which helps narrow the match when comparing against the original starter.

There is also a practical interchange note to keep in mind: 13 and 15 tooth units are interchangeable, and the MXS2018 has a shorter body. That makes part number checking especially important before ordering, along with the rotation, tooth count and mounting pattern.

Key Features

• New OEX starter motor
• 12V electrical system
• 15 tooth pinion
• Clockwise rotation
• Mitsubishi style unit
• 2 hole starter mount

Specifications

• Brand: OEX
• Part No.: MXS2018
• Product type: Starter motor
• Voltage: 12V
• Power rating: 1.6kW
• Number of teeth: 15
• Rotation: CW
• Starter mount type: 2 hole

Fitment guidance

• Suits Mitsubishi applications
• 13 and 15 tooth units are interchangeable
• MXS2018 has a shorter body

Application and Buying Notes

Start with the part number MXS2018, then check the practical match points: 12V, 15 tooth, clockwise rotation, 2 hole mount and 77mm flange diameter. Those details are the clearest way to compare this starter against the unit being replaced.

The listed 227mm overall length and 45mm pinion diameter are useful when space and engagement geometry matter. The note that MXS2018 has a shorter body means the physical length should be compared carefully if the old starter sits tight against nearby components.

Because 13 and 15 tooth units are interchangeable, tooth count alone is not enough to confirm a replacement. Use the full combination of tooth count, rotation, mount type, voltage and the Mitsubishi application to avoid a mismatch.

The warranty listed is 3 years for passenger use and 1 year for commercial use. Warranty coverage does not replace fitment checking, so the safest approach is still to match the application details, dimensions and part number before purchase.

Before supply, the safest approach is to confirm the original unit details against the listed part number, voltage, output rating, mounting arrangement, and pulley configuration. That checking process is standard practice in the parts trade because visually similar units can still differ in service-critical ways.

For workshop, fleet, and equipment applications, accurate identification of part number MXS2018 helps avoid unnecessary freight, additional labour, and vehicle or machine downtime. Where the application is not straightforward, the original unit, OEM reference, or workshop records should be used as the primary confirmation point.

Relevant published details for this unit include Type STARTER MOTOR, Unit of Measure EACH, Warranty 3yr Passenger 1yr Commercial, Mount Hole Diameter 10.5, Overall Length 227mm, Pinion Diameter 45mm, Rotation CW, Voltage 12, New / Reman. New, Wet / Dry Clutch Dry.

Additional published details for cross-checking include Product Group 2 STARTER MOTORS, Part No. MXS2018, Brand OEX, Description OEX Starter Motor 12V 15Th CW Mitsubishi Style, Flange Diameter 77mm, Number of Teeth 15, Pinion at Rest 28mm, Power Rating 1.6kW, Suits Unit Make Mitsubishi.

OEX Starter Motor 12V 15Th CW Mitsubishi Style. Part number MXS2018 should be checked first. Listed voltage is 12. These details form the core reference points used by parts interpreters when confirming the correct replacement.

For part number MXS2018, the normal identification sequence is part number, electrical rating, mounting arrangement, connector or terminal style, and pulley or drive details. Using those checkpoints helps confirm that the listed unit matches the service requirement rather than only looking similar.

For a starter motor in workshop, fleet, trade, agricultural, or construction service, the listed voltage 12 should be checked carefully. Incorrect selection can affect installation time, return freight, and equipment availability.

Available application references include CASE 245, CASE 245 1986, CASE 275, CASE 275 1986, CATERPILLAR 302.5C, CATERPILLAR 302.5C 2006. Even with application listings, final confirmation should still be based on the exact unit being replaced and the service requirements of the vehicle or machine.

Compatibility note: Confirm fitment by matching the part number MXS2018, 12V specification, 15 tooth count, clockwise rotation, 2 hole mount, 77mm flange diameter and Mitsubishi application details against the unit being replaced.

FAQ

What is the part number for this starter motor?

The part number is MXS2018. For this listing, part number MXS2018 is the main reference point. Listed voltage is 12. Published fitment references include CASE 245, CASE 245 1986, CASE 275. These details should still be checked against the original unit before ordering.

Is this a new or remanufactured starter motor?

It is listed as new. For this listing, part number MXS2018 is the main reference point. Listed voltage is 12. Published fitment references include CASE 245, CASE 245 1986, CASE 275. These details should still be checked against the original unit before ordering.

What voltage does this starter motor use?

It is a 12V starter motor. For this listing, part number MXS2018 is the main reference point. Listed voltage is 12. Published fitment references include CASE 245, CASE 245 1986, CASE 275. These details should still be checked against the original unit before ordering.

How many teeth does the pinion have?

It has 15 teeth. The notes also state that 13 and 15 tooth units are interchangeable. For this listing, part number MXS2018 is the main reference point. Listed voltage is 12. Published fitment references include CASE 245, CASE 245 1986, CASE 275. These details should still be checked against the original unit before ordering.

What rotation does it use?

It is clockwise rotation, listed as CW. For this listing, part number MXS2018 is the main reference point. Listed voltage is 12. Published fitment references include CASE 245, CASE 245 1986, CASE 275. These details should still be checked against the original unit before ordering.

What should I check before ordering?

Match the part number MXS2018, 12V rating, 15 tooth count, CW rotation, 2 hole mount type, 77mm flange diameter and Mitsubishi application details to the original unit. For this listing, part number MXS2018 is the main reference point. Listed voltage is 12. Published fitment references include CASE 245, CASE 245 1986, CASE 275. These details should still be checked against the original unit before ordering.